Looking for proximity warnings or beacon-based exclusion zones around moving machinery and vehicles?
When does an invisible boundary become a hazard?
Every site has areas people must not enter or must enter only with the right controls. On a construction site, excavations open and close, crane lifting zones shift and vehicle routes change. Workers cannot always see where danger begins. Fencing, barriers, signage, inductions and toolbox talks are vital, but they depend on people remembering the rules in the moment.
Which industries are most affected?
Construction
Excavation hazards, crane lifting zones, service roads and live-work areas
Surface mining and aggregates
Haul roads, blast zones, crushers and mobile plant
Airports
Live airside areas, works near runways, ramp and apron zones
Renewable and energy construction
Turbine and lifting operations, cable laying and substation works
Rail and Transportation Infrastructure
Active rail lines, maintenance zones and vehicle operating areas
Ports, Marine and Logistics
Cranes, container handling equipment, heavy vehicles and quaysides
The impact of hazardous area incursions
People entering the wrong area at the wrong time can be struck, crushed or exposed to hazards they should never encounter. Organisations face investigations, enforcement action, site shutdowns and project delays.
Great Britain: worker deaths from being struck by a moving vehicle. Source: HSE
United States: worker deaths from being struck, caught or compressed by running powered equipment. Source BLS
Australia: worker deaths in vehicle incidents. Source SWA
*The above figures do not isolate incursions.
HSE: Work-related fatal injuries
Compliance obligations
After an incident, regulators and clients expect evidence, yet manual enforcement and near miss reporting rarely record who entered a dangerous area, when and how often. Duty holders must therefore show how they control hazards as site conditions change. The legislation that sets this duty in each region is below.
Why incursions are hard to control
Changing work areas
temporary hazards and moving exclusion zones outpace fixed barriers and signs
Rules people easily miss
reminders such as hearing protection, a live hot works permit or the isolation process rely on memory
Transient workforces
high contractor turnover makes it hard to communicate changing zones and controls consistently
No real-time warning
nothing alerts a worker at the moment they approach danger
No visibility
without data on incursions and near misses, recurring risks stay hidden
Disconnected tools
managing several risks with separate point solutions adds complexity and admin
Preventing incursions with Ideagen R-Link geofencing
Geofencing is the use of a digital boundary around an area to trigger an alert when a person or vehicle approaches or enters it. Ideagen Wearable Safety (formerly Reactec) uses geofencing to turn invisible boundaries into active safety controls.
- Real-time alerts reach pedestrians and drivers at the point of risk.
- Dynamic zones change with the site and need no extra infrastructure.
- Location-specific messages reinforce site rules such as "Hearing protection zone" or "Work at height above".
- Evidence: incursion reporting, map-based playback and trend analysis record every breach by zone, worker and event type.
- One wearable, one platform: Ideagen R-Link 1.1 includes geofencing with no separate subscription.
Geofencing or proximity: which do you need?
Ideagen R-Link proximity alerts workers who get too close to a beacon fitted to a vehicle, machine or restricted area. Ideagen R-Link geofencing alerts them when they approach or enter an area you define digitally. Both run on the same wearable.
| Proximity | Geofencing | |
| Zone created by | Beacons you fit to vehicles, plant or restricted areas | Digital zones you set in Ideagen Wearable Safety Analytics |
| Alert triggered by | Getting too close to a beacon | Approaching or entering a zone |
| Messaging | N/A | Custom location-specific messaging delivered directly to the wearable |
| Best for | Pedestrians and drivers around moving plant, including authorised close working | Any dynamic, temporary or high-risk areas, including excavations, lifting zones, haul roads and permit areas |
Already using Ideagen R-Link? Contact us about adding geofencing to your deployment.
Related content
Proximity hazards | Ideagen Wearable Safety Analytics | Evidence and research
Frequently asked questions
Most incursions occur when site conditions change faster than the controls designed to manage them. Excavations, lifting operations and permit-controlled work often create temporary hazards without permanent boundaries. As work progresses, restricted areas move, fixed barriers become outdated and workers may rely on memory to follow site rules. Contractors, visitors and personnel working under pressure can easily miss changes, particularly in noisy environments or around moving plant and equipment.
Hazards on construction sites change as work progresses, making it difficult for fencing, signage, inductions and toolbox talks alone to keep pace. Geofencing adds a digital layer of protection around excavations, lifting operations and haul routes, alerting workers and drivers as they approach or enter a restricted area while recording every breach.
No. Physical controls remain vital. Geofencing adds an alert at the moment someone approaches danger.
Yes. Geofence zones can be placed around excavation hazards and easily updated as conditions change. Workers are alerted on their wearable before they reach the restricted area.
Proximity alerts workers who get too close to a beacon you fit to a vehicle, machine or restricted area. Geofencing alerts them when they approach or enter a zone you set digitally, such as an excavation.
Yes. Geofencing alerts both.
Manual near miss reporting rarely records who entered a dangerous area, when and how often. Geofencing records every incursion by zone, worker and event type. Safety teams can review map-based playback and trends to spot recurring risks.